AXIS Q1604 Network Camera
Events
Actions
Available
actions
include:
•
Day/Night Vision Mode
– Set day mode (IR cut filter on) or night mode (IR cut filter off).
•
Output Port
– Activate an I/O port to control an external device.
•
Overlay Text
– Display an overlay text. See
Use Overlay Text in an Action Rule on page 27
.
•
Play Audio Clip
– See
Audio Clips on page 30
.
•
Record Video
– Record video and audio to a selected storage. To record audio, use AAC audio encoding and make sure that
audio is enabled in the selected stream profile.
•
Send Images
– Send images to a recipient.
•
Send Notification
– Send a notification message to a recipient.
•
Send SNMP Trap
– Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured
under
System Options
>
Network
>
SNMP
.
•
Send Video Clip
– Send a video clip to a recipient.
•
Status LED
– Flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and configuration.
•
WDR Mode
– The WDR Mode or Lightfinder Mode can be turned on when the action rule is triggered. This action may
be used to change between these modes automatically.
Add Recipients
The product can send media files and messages to notify users about events. Before the product can send media files or notification
messages, you must define one ore more recipients. For information about available options, see
Recipient Types on page 40
.
To add a recipient:
1. Go to
Events > Recipients
and click
Add
.
2. Enter a descriptive name.
3. Select a recipient
Type
.
4. Enter the information needed for the recipient type.
5. Click
Test
to test the connection to the recipient.
6. Click
OK
.
Recipient Types
The following recipients are available:
Recipient
Use with action
Notes
Send Images
Send Notification
Send Video Clip
An email recipient can contain multiple email addresses.
FTP
Send Images
Send Video Clip
40
