background image

AXIS P5654-E Network Camera

Additional settings

Pan, tilt, and zoom (PTZ)

Limit the pan, tilt, and zoom movements

If there are parts of the scene that you don’t want the camera to reach, you can limit the pan, tilt, and zoom movements. For
example, you want to protect the privacy of residents in an apartment building, which is located close to a parking lot that you intend
to monitor. To limit the movements, go to

Settings > PTZ > Limits

.

Guard tours

A guard tour displays the video stream from different preset positions either in a predetermined or random order, and for configurable
periods of time. Once started, a guard tour continues to run until stopped, even when there are no clients (web browsers) viewing the
images.

Create a guard tour with preset positions

A guard tour displays the video stream from different preset positions either in a predetermined or random order, and for configurable
periods of time.

1. Go to

Settings > PTZ > Guard tours

.

2. Click

+

.

3. Select

Preset position

.

4. To edit the guard tour’s properties, click

.

5. Type a name for the guard tour and specify the pause length in minutes between each tour.

6. If you want the guard tour to go to the preset positions in a random order, turn on

Shuffle

.

7. Click

Done

.

8. Click

Add

to add the preset positions that you want in your guard tour.

9. Click

Done

to exit the guard tour settings.

10. To schedule the guard tour, go to

System > Events

.

Events

Set up rules and alerts

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text when it records.

Direct the camera to a preset position when the camera detects motion

This example explains how to set up the camera to go to a preset position when it detects motion in the image.

Make sure that AXIS Video Motion Detection is running:

1. Go to

Settings > Apps

>

AXIS Video Motion Detection

.

2. Start the application if it is not already running.

3. Make sure you have set up the application according to your needs.

Add a preset position:

10

Содержание P5654-E



















Отзывы: