AXIS P56 PTZ Network Camera Series
How to repaint the camera
How to repaint the camera
The top cover can be repainted to match the installation environment.
The material used in the covers is ASA+PC. Use paint suitable for this material.
1. Remove the three mounting screws.
2. Remove the three top cover screws (T20) and remove the top cover.
3. Repaint the top cover.
4. Assemble the top cover. Use the triangular marking to position it correctly.
5. Fasten the top cover screws with a torque of 2.5 Nm (T20).
NO
NO
NOTICE
TICE
TICE
To prevent the camera from vibrating during operation, tighten all the screws carefully.
6. Fasten each of the mounting screws equally, with a torque of 2.5 Nm at the positions marked with dots.
1
Mounting screws (3)
2
Top cover
3
Top cover screws (3)
4
Triangular marking
4
