AXIS P4707-PLVE Panoramic Camera
Configure your device
5. In the list of conditions, under
Device status
, select
Shock detected
.
6. Click
+
to add a second condition.
7. In the list of conditions, under
Scheduled and recurring
, select
Scheduled event
.
8. In the list of schedules, select
After hours
.
9. In the list of actions, under
Recordings
, select
Record video while the rule is active
.
10. Select where to save the recordings.
11. Select a
Camera
.
12. Set the prebuffer time to 5 seconds.
13. Set the postbuffer time to 60 seconds.
14. Click
Save
.
Send an email automatically if someone spray paints the lens
Activate the tampering detection:
1. Go to
System > Detectors > Camera tampering
.
2. Set a duration for
Trigger after
. The value indicates the time that must pass before an email is sent.
3. Turn on
Trigger on dark images
to detect if the lens is sprayed, covered, or rendered severely out of focus.
Add an email recipient:
4. Go to
System > Events > Recipients
and add a recipient.
5. Type a name for the recipient.
6. Select
.
7. Type an email address to send the email to.
8. The camera doesn’t have it’s own email server, so it has to log into another email server to send mails. Fill in the rest of the
information according to your email provider.
9. To send a test email, click
Test
.
10. Click
Save
.
Create a rule:
11. Go to
System > Events > Rules
and add a rule.
12. Type a name for the rule.
13. In the list of conditions, under
Video
, select
Tampering
.
14. In the list of actions, under
Notifications
, select
Send notification to email
and then select the recipient from the list.
15. Type a subject and a message for the email.
16. Click
Save
.
14
