AXIS P3715-PLVE Network Camera
Additional settings
3. Make sure you have set up the application according to your needs.
Create a rule:
1. Go to
Settings > System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under
Application
, select
AXIS Video Motion Detection (VMD)
.
4. In the list of actions, under
Recordings
, select
Record video while the rule is active
.
5. Select an existing stream profile or create a new one.
6. Set the prebuffer time to 5 seconds.
7. Set the postbuffer time to 60 seconds.
8. In the list of storage options, select
SD card
.
9. Click
Save
.
Send an email automatically if someone spray paints the lens
1. Go to
Settings > System > Detectors
.
2. Turn on
Trigger on dark images
. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
3. Set a duration for
Trigger after
. The value indicates the time that must pass before an email is sent.
Create a rule:
1. Go to
Settings > System > Events > Rules
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select
Tampering
.
4. In the list of actions, select
Send notification to email
.
5. Select a recipient from the list or go to
Recipients
to create a new recipient.
To create a new recipient, click
. To copy an existing recipient, click
.
6. Type a subject and a message for the email.
7. Click
Save
.
Add audio
Add audio capability to your product
With the AXIS T61 Audio and I/O Interface products, you can add audio capability to your product. Use the setup in, for example,
interview rooms. You can place the Axis network video product on the wall or ceiling to give good visual coverage, and the
AXIS T61 Audio and I/O Interface on or above the interview table.
13
