Axis P3224-LV Mk II Скачать руководство пользователя страница 46

Страница: 46 / 63

AXIS P3224-LV Network Camera

System Options

Certificates

Certificates are used to authenticate devices on a network. Typical applications include encrypted web browsing (HTTPS), network
protection via IEEE 802.1X and secure upload of images and notification messages for example via email. Two types of certificates
can be used with the Axis product:

Server/Client certificates -

To authenticate the Axis product.

CA certificates -

To authenticate peer certificates, for example the certificate of an authentication server in case the Axis product is

connected to an IEEE 802.1X protected network.

Note

Installed certificates, except preinstalled CA certificates, will be deleted if the product is reset to factory default. Preinstalled
CA certificates that have been deleted will be reinstalled.

Server/Client

certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited

protection and can be used before a CA-issued certificate has been obtained.

To install a self-signed certificate:

1. Go to

Setup > System Options > Security > Certificates

2. Click

Create self-signed certificate

and provide the requested information.

To create and install a CA-signed certificate:

1. Create a self-signed certificate as described above.

2. Go to

Setup > System Options > Security > Certificates

3. Click

Create certificate signing request

and provide the requested information.

4. Copy the PEM-formatted request and send to the CA of your choice.

5. When the signed certificate is returned, click

Install certificate

and upload the certificate.

Server/Client certificates can be installed as

Certificate from signing request

or as

Certificate and private key

. Select

Certificate

and private key

if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled

CA certificates

. If required, additional CA certificates can be installed:

1. Go to

Setup > System Options > Security > Certificates

2. Click

Install certificate

and upload the certificate.

Date & Time

The Axis product’s date and time settings are configured under

System Options > Date & Time

Current Server Time

displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see

below).

To change the date and time settings, select the preferred

Time mode

under

New Server Time

•

Synchronize with computer time

– Sets date and time according to the computer’s clock. With this option, date and

time are set once and will not be updated automatically.

•

Synchronize with NTP Server

– Obtains date and time from an NTP server. With this option, date and time settings are

updated continuously. For information on NTP settings, see

NTP Configuration on page 49

If using a host name for the NTP server, a DNS server must be configured. See

DNS Configuration on page 49

•

Set manually

– Allows you to manually set date and time.

Содержание P3224-LV Mk II
































































Результаты поиска

Содержание P3224-LV Mk II

Отзывы:

Похожие инструкции для P3224-LV Mk II

Бренды по названию

Популярные бренды

Axis P3224-LV Mk II, Руководство пользователя

Результаты поиска

Содержание P3224-LV Mk II

Отзывы:

Похожие инструкции для P3224-LV Mk II

Бренды по названию

Популярные бренды