AXIS P1375 Network Camera
Setup
When you set up a view area, we recommend you to set the video stream resolution to the same size as or smaller than the view area
size. If you set the video stream resolution larger than the view area size it implies digitally scaled up video after sensor capture,
which requires more bandwidth without adding image information.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
1. Go to
Settings > Image
.
2. If required, turn on WDR under
Wide dynamic range
.
3. Use the
Local contrast
slider to adjust the amount of WDR.
Image without WDR.
Image with WDR.
Note
WDR may cause artifacts in the image.
Find out more about WDR and how to use it at
About overlays
Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp,
or during product installation and configuration.
Make the camera show a text overlay when it detects motion
This example explains how to display the text “Motion detected” when the camera detects motion:
9