AXIS P13-E Series
1
Desiccant bag
8. Close the housing. Make sure to alternately tighten the bottom cover screws a few turns
at a time until they are tight (torque 1.5 Nm). This will help ensure that the bottom
cover gasket is compressed evenly.
NO
NO
NOTICE
TICE
TICE
Make sure not to pinch any cables when closing the housing.
9. If required, loosen the screws on the weather shield, adjust its position and tighten
the screws.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products
on the network and assigning them IP addresses in Windows®. Both applications are free and can
be downloaded from
www.axis.com/techsup
The product can be used with most operating systems and browsers. The recommended browsers are
•
Internet Explorer
®
with Windows
®
•
Safari
®
with OS X
®
•
Chrome
TM
or Firefox
®
with other operating systems.
For more information about using the product, see the User Manual available at
www.axis.com
Adjust focus
Follow these instructions to set the focus and zoom.
If the camera is mounted so that you cannot look at the image and access the lens at the same
time, use the Focus Assistant, see
Adjust focus with the Focus Assistant on page 25
.
1. Open the product’s home page and go to
Setup
>
Basic Setup
>
Focus
.
2. Under the
Basic
tab, click
Open iris
. If the button is inactive the iris is already open.
3. If focus has been set before, click
Reset
to reset the back focus.
24
