Axis P1245 страница 40 Скачать руководство пользователя | Manualshive

Страница: 40 / 51

background image

AXIS P1245 Network Camera

About system options

Bonjour can be disabled under

System Options > Network > Bonjour

.

Storage

About SD cards

NO

NO

NOTICE

TICE

TICE

To prevent data corruption, the SD card should be unmounted before removal.

Note

For SD card recommendations see

www.axis.com

The Axis product supports microSD/microSDHC/microSDXC cards.

The following SD card file systems are supported:

•

ext4

— recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access

data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•

vFAT

— supported by most operating systems for personal computers.

The SD card is managed on the

System Options > Storage

page. Click

SD Card

to open

Storage Management

.

If the card’s status shows as failed, click

Check disk

to see if the problem can be found and then try

Repair

. This option is only

available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under

General Settings

, select

Remove recordings

older than

and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select

Lock

under

General Settings

.

How to mount and unmount the SD card

NO

NO

NOTICE

TICE

TICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual
mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1. Open the Axis product’s webpages and go to

Setup > System Options > Storage

.

2. Click

SD Card

.

3. Click

Unmount

.

4. The card can now be removed.

How to format the SD card

NO

NO

NOTICE

TICE

TICE

Formatting the SD card will remove all data and recordings stored on the card.

The Axis product can be configured to automatically format SD cards that are inserted into the product. If autoformat is enabled and
an SD card is inserted, the product will check if the SD card has the ext4 file system. If the card has a different file system, the
card will automatically be formatted to ext4.

40

«
...
38
39
40
41
42
...
»

Содержание P1245




















































Отзывы:

Нет отзывов

Похожие инструкции для P1245

MACRO SPEEDLITE MR-14EX

Бренд: Canon Страницы: 2

Macro ring lite MR-14EX II

Бренд: Canon Страницы: 87

Бренд: Canon Страницы: 3

Schneider D-XENOGON 35

Бренд: Samsung Страницы: 24

20-50mm F3.5-5.6 ED II

Бренд: Samsung Страницы: 2

Бренд: Omni Страницы: 108

Бренд: Olimpia electronics Страницы: 3

SEIRX30-761AI-VD

Бренд: Okina Страницы: 31

Бренд: UNELL Страницы: 100

Бренд: Okina USA Страницы: 3

Бренд: Watec Страницы: 63

Бренд: Siqura Страницы: 2

Бренд: Axis Страницы: 2

Бренд: Axis Страницы: 2

Бренд: Umirs Europe Страницы: 24

Бренд: Watt Stopper Страницы: 12

Бренд: Malmbergs Страницы: 6

Бренд: Xineron Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды