AXIS 2120 Installation Guide
-
English
Page 2 of 5
Verifying the Installation From Your Browser...
To access the AXIS 2120
Home Page
, start your Web browser and enter the IP address in the
location/address field, e.g 171.21.1.200.
Click the
Installation Wizard
button. The wizard guides your through the remaining
installation procedures and will help you configure your application. Detailed information on how
to use the various product functions is conveniently provided in the
on-line help, available from
configuration pages.
Installing Your Camera to a Modem
The information in this section describes how to connect the AXIS 2120 to a serial modem for
transmitting images over a normal Dial-up connection.
Important!
Connecting Your Computer Using the Null Modem Cable...
Follow the steps below to configure a serial modem connection for your AXIS 2120:
•
The information and screen examples featured within this section are specific to Windows NT. And, although
similar to the Dial-up implementations in Windows 95, 98, and 2000, small deviations in the dialog instructions
for other operating systems should be expected. Refer to your system information for further information on
creating a Dial-up modem connection if you are using any other operating system.
•
Windows Dial-up Networking and TCP/IP must be correctly installed prior to commencing with the modem
cable connection. Detailed information on how to check this is provided in the Microsoft Windows Help.
Connect the supplied Null
modem cable between the Serial
Connector on the AXIS 2120 and
the serial port on your computer.
From the Start menu, open
the Control Panel and double
click the
Modems
icon.
Select the serial port
to which your AXIS 2120
is now connected via the
Null Modem cable.
Click Next>.
A Standard 28800
modem connection is now
available for the AXIS 2120.
Click Finish to close the
Install New Modem
wizard.
If a Standard Modem is already set up
and displayed in the Modem Properties
dialog (see right) you should proceed
directly to step 8.
Select the Standard 28800
modem from the displayed list
of modems. Click Next>.
Click the Properties button to finally check that
the displayed Communications Port is set correctly;
that is, set to the same port as you have connected
the AXIS 2120. Click OK.
Connect the power supply to
the camera server and check that
the Power Indicator is lit.
Click Close.
Check the dialog:
Don’t detect my modem, I will
select it from a list
. Click Next>.
7
8
9
10
2120ig_master.fm Page 2 Monday, July 3, 2000 4:33 PM
