ME-02 USER MANUAL MD004
41
_____________________________________________________________________________________________
13.
Maintenance and troubleshooting
1.
The device should be kept clean.
2.
Take care that no dirt gets between the casing and the weighing platform (pan). If found any, remove the pan
(lift it up), remove dirt and then replace the pan.
3.
In case of improper operation caused by short-lasting power supply decay, unplug the scale from the mains
and then plug it again after few seconds (or switch the power off and on with the power switch if installed).
4.
If the scale is switched on with empty pan and “UnLoAD” communicate appears, the load cell has been
mechanically damaged – please contact our nearest service.
5.
It is forbidden to make any repairs by unauthorised personel
6.
To repair the scale, please contact our nearest service.
