Axis M3007-P Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 63

background image

AXIS M3007-P Network Camera

System Options

The

Date & Time Format Used in Images

is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see

File Naming & Date/Time Formats

in the online help

for information on how to create custom date and

time formats. To include date and time in the overlay text, go to

Video

and select

Include date

and

Include time

.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version
must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are
configured under

System Options > Network > TCP/IP > Basic

.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of
IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is
then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset
the product to the factory default settings (see

) and then perform the installation again.

To use a static IP address, check

Use the following IP address

and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to

System Options > Network > TCP/IP > Basic

. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The product’s IP address can be assigned using ARP and Ping. For instructions, see

Assign IP Address Using ARP/Ping on page 48

.

The ARP/Ping service is enabled by default but is automatically disabled two minutes after the product is started, or as soon as an IP
address is assigned. To re-assign IP address using ARP/Ping, the product must be restarted to enable ARP/Ping for an additional
two minutes.

To disable the service, go to

System Options > Network > TCP/IP > Basic

and clear the option

Enable ARP/Ping setting of IP address

.

Pinging the product is still possible when the service is disabled.

Assign IP Address Using ARP/Ping

The product's IP address can be assigned using ARP/Ping. The command must be issued within 2 minutes of connecting power.

1. Acquire a free static IP address on the same network segment as the computer.

2. Locate the serial number (S/N) on the product label.

3. Open a command prompt and enter the following commands:

Linux/Unix syntax

arp -s <IP address> <serial number> temp
ping -s 408 <IP address>

Linux/Unix example

48

«
...
46
47
48
49
50
...
»

Содержание M3007-P
































































Отзывы:

Нет отзывов

Похожие инструкции для M3007-P

Бренд: Walimex Pro Страницы: 4

Бренд: Samsung Страницы: 105

Бренд: Samsung Страницы: 131

Бренд: Samsung Страницы: 131

Бренд: Samsung Страницы: 120

Бренд: Samsung Страницы: 120

HZ10W - Digital Camera - Compact

Бренд: Samsung Страницы: 22

Бренд: Samsung Страницы: 214

Бренд: Samsung Страницы: 34

GX-20 - Digital Camera SLR

Бренд: Samsung Страницы: 163

Бренд: Samsung Страницы: 95

TL320 - Digital Camera - Compact

Бренд: Samsung Страницы: 102

Бренд: Samsung Страницы: 132

EC-NV4ZZSBA/US - NV4 Digital Camera

Бренд: Samsung Страницы: 119

S85 - Digital Camera - Compact

Бренд: Samsung Страницы: 110

Бренд: Samsung Страницы: 113

Бренд: Xiaomi Страницы: 36

Бренд: Olympus Страницы: 148

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды