Axis M11 Network Camera Series, Руководство пользователя

Страница: 35 / 50

35
AXIS M11 Series - About
Plain Config
Plain Config is for the advanced user with experience of Axis network camera configuration. All parameters can be set and
modified from this page. Help is available from the standard help pages.
About
Here you can find basic information about your network camera. You can also view third party software licenses.
Resetting to Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described
in Maintenance, on page 33) or use the
Control button
on the side of the camera (see page 5) as described below:
Using the Control Button
This will reset all parameters, including the IP address, to the factory default settings:
1. Disconnect the network cable.
2. Press and hold the Control button and reconnect the network cable.
3. Keep the Control button pressed until the
Status indicator
color changes to amber (this may take up to 15 seconds).
4. Release the Control button. When the Status indicator changes to green (which may take up to 1 minute), the process
is complete and the camera has been reset. The unit now has the default IP address 192.168.0.90
5. Re-assign the IP address, for instructions see the Installation Guide supplied with the camera.