24
AXIS M11 Series - Events
Create folder
– Images uploaded to FTP and HTTP servers can be saved to designated folders. Folders can for example be
named using the current date and time, see File Naming & Date/Time Formats in the online help.
Base file name
– Used to name all uploaded images. Add a suffix or use your own file format to give the images unique
names, see File Naming & Date/Time Formats in the online help.
Use stream profile
– Select the stream profile to upload or send as e-mail. Only MJPEG stream profiles are available.
Scheduled Event
A
Scheduled event
can be activated at preset times, in a repeating pattern on selected weekdays.
How to set up a scheduled event
The following example describes how to configure the camera to save images from pre-programmed time periods.
1. Click
Add scheduled
on the
Event Types
page.
2. Enter a descriptive
Name
for the event, such as Scheduled e-mail upload.
3. Set the
Priority
(High, Normal or Low).
4. Set the
Activation Time
parameters (24h clock) for the event. For example, select
Recurrence pattern
and let the
event start on Sundays at 13.00 with a duration of 12 hours.
5. Set the
When Activated
parameters, that is, define what the camera should do when the event is active. To upload
images, select
Save stream
and enter the required information. See
Save stream,
on page 23.
6. Click
OK
to save the Event in the Event Types list.
Please see the online help
for descriptions of each available option.
Camera Tampering
The camera tampering application generates an alarm whenever the camera is repositioned, or when the lens is covered,
sprayed, or severely defocused.
First, you must create an event, see
How to set up a triggered event,
on page 23, for the camera to send an alarm.
Settings
The
Minimum duration
parameter sets the minimum tampering period, that is an alarm will not be triggered until this period
has lapsed, even if the tampering conditions are otherwise met. This can help prevent false alarms for known conditions that
affect the image.
If the camera lens is sprayed or covered so that the camera live view becomes dark, it will not be possible to distinguish this
situation from other situations where the same effect is seen, such as when lighting conditions change.
When the
Alarm for dark images
parameter is enabled, alarms are generated for all cases where the lights are either dimmed
or turned off, or if the lens is sprayed, covered, or rendered severely out of focus. If not enabled, no alarm will be sent.
After you define these settings, click
Save
.
Motion Detection
Motion detection is used to generate an alarm whenever movement occurs (or stops) in the camera’s field of view. Up to 10
Include and Exclude windows can be configured:
•
Include windows
target specific areas within the whole image.
•
Exclude windows
define areas within an Include window that should be ignored (areas outside Include windows are
automatically ignored).
Once configured, the motion detection windows appear in the list of available triggers for triggered events. See
How to set up
a triggered event,
on page 23.
Содержание M11 Network Camera Series
Страница 50: ...AXIS M11 Series Index 50 ...
