Axis E1 Скачать руководство пользователя страница 40

Страница: 40 / 74

WARNING!

Insulate any tools used within the battery

area to prevent sparks or battery

explosion caused by shorting the battery terminals or wiring. Remove the batteries, or cover

the exposed terminals with an insulating material.

Trailer Hitch Bracket

This vehicle is equipped with a receiver hitch bracket for a trailer

hitch. Trailer towing

equipment is not supplied with this vehicle.

To avoid injury and property damage, always heed the warnings and towing capacities outlined

in this manual

FEATURES AND CONTROLS

Main Power Connector

Damage to electrical connections and components will occur if they are unplugged before the main

power connector is disconnected. Always disconnect the main power connector

before servicing or

unplugging any electrical components.

When disconnected, the main power connector

disconnects the battery pack from all electrical

Main Power Connector

components, with the exception of the contactor.

After servicing the vehicle, the main power

connector should be the last connection to be made.

The main power connector is located under the

seat on the driver’s side of the controller tray,

adjacent to the main line contactor. To disconnect,

unplug the connector.

To disconnect the battery pack from the vehicle

completely, disconnect the main power connector,

then remove the B+ wire from the battery terminal.

Battery Orientation and Series Connection

Front of Venicle

Содержание E1











































































Результаты поиска

Содержание E1

Отзывы:

Бренды по названию

Популярные бренды

Axis E1, Руководство пользователя

Результаты поиска

Содержание E1

Отзывы:

Бренды по названию

Популярные бренды