Axis D2110-VE, Руководство пользователя

Страница: 17 / 26

AXIS D2110-VE Security Radar
Validate your installation
1. Go into the radar’s web interface and choose to record the session. For help doing this go to Record and watch video .
2. Begin 60 m (197 ft) out from the radar and walk straight across the radar.
3. Check that the radar’s web interface shows the symbol for a human classification.
4. Check that the radar’s web interface shows the correct direction of travel.
Create a table similar to the one below to help you record the data from your validation.
Test
Pass/Fail
Comment
1. Check there are no unwanted
detections when the area is clear
2a. Check the object is detected with
the correct symbol for ‘Human’ when the
radar is approached from the front
2b. Check the direction of travel is correct
when the radar is approached from the
front
3a. Check the object is detected with
the correct symbol for ‘Human’ when the
radar is crossed
3b. Check the direction of travel is correct
when the radar is crossed
Complete the validation
Once you have successfully completed the first part of the validation, you should perform the following tests to complete the
validation process.
1. Make sure you have configured your radar and followed the instructions.
2. For further validation, .
3. Set the radar include zone to trigger to when an appropriate object is detected. By default, the prebuffer is set to two
seconds but you can you can change this in the web interface if needed.
4. Set the radar to when an appropriate object is detected.
5. Set the trial lifetime to one hour so that it will safely exceed the time it takes for you to leave your seat, walk around the
area of surveillance, and return to your seat. The trial lifetime will keep the track in the radar's live view for the set time
and, once you have finished the validation, it can be disabled.
6. Walk along the border of the radar coverage area and make sure that the trailing on the system matches the route that
you walked.
7. If you are unsatisfied with the results of your validation, you should re-calibrate the reference map and repeat the
validation.
17