AXIS P3807-PVE Network Camera
Additional settings
Set up network storage
To store recordings on the network, you need to set up network storage:
1. Go to
Settings > System
>
Storage
.
2. Click
Setup
under
Network storage
.
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click
Connect
.
Events
Set up rules and alerts
You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text when it records.
Trigger an action
1. Go to
Settings > System > Events
to set up a rule. The rule defines when the device will perform certain actions. Rules
can be setup as scheduled, recurring, or for example, triggered by motion detection.
2. Select the
Condition
that must be met to trigger the action. If you specify more than one condition for the rule, all of the
conditions must be met to trigger the action.
3. Select which
Action
the device should perform when the conditions are met.
Note
If you make changes to an active rule, then the rule needs to be restarted for the changes to take effect.
Record video when the camera detects motion
This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to
stop one minute after.
Make sure that AXIS Video Motion Detection is running:
1. Go to
Settings > Apps
>
AXIS Video Motion Detection
.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Create a rule:
1. Go to
Settings > System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under
Application
, select
AXIS Video Motion Detection (VMD)
.
4. In the list of actions, under
Recordings
, select
Record video while the rule is active
.
5. Select an existing stream profile or create a new one.
6. Set the prebuffer time to 5 seconds.
15
