Axis CAMERA STATION 1.2 Скачать руководство пользователя страница 29

Страница: 29 / 78

AXIS Camera Station Administration

AXIS Camera Station User’s Manual

Save recordings for

(days)

Specify the number of days to store saved recordings on hard disk. The value
"default" is specified under the

General tab, see page 38.

Backup old recordings

to external storage

Images will be deleted when more hard disk space is needed, or when the
recording is older than the amount of days specified in

Save recordings for. If

this is enabled, recordings will be backed up to the specified external storage
folder, Example: \\192.168.0.110\backup\

Click the

browse button to browse to an external backup folder:

The user account properties should be set in the same way as when saving
recordings, see above.

Save backup for (days)

Specify the number of days to store the backup on external storage.

Recording Buffers and

Duration

Pre-event recording

buffer (seconds)

Specify how many seconds of images you want to record before motion is
detected or the alarm is triggered. Up to 50 images can be saved in this buffer.

Post-event recording

buffer (seconds)

Specify how many seconds of images to record after motion detection or the
alarm has ended.

Maximum event time

(minutes)

The maximum recording period (in minutes).

The input/output definitions specified under the

External I/Os tab are affected

by this parameter. See Input/Output, on page 42 for information on configuring

inputs and outputs.

•

If the maximum is reached but motion is still detected at an

input, a new

event is created and recording continues. See Example 1: Maximum alarm

event time - Input, on page 30.

•

If the maximum is reached but motion is still detected at an

output,

recording will only continue the time specified here. See Example 2:

Maximum alarm event time - Output, on page 30.

The

Maximum event time is used to divide the Continuous recording into

events of X minutes.

Содержание CAMERA STATION 1.2















































































Результаты поиска

Содержание CAMERA STATION 1.2

Отзывы:

Похожие инструкции для CAMERA STATION 1.2

Бренды по названию

Популярные бренды

Axis CAMERA STATION 1.2, Руководство пользователя

Результаты поиска

Содержание CAMERA STATION 1.2

Отзывы:

Похожие инструкции для CAMERA STATION 1.2

Бренды по названию

Популярные бренды