AXIS P33 Network Camera Installation Guide
Page 13
EN
GLIS
H
Adjust the Lens
Open the
Live View
page in the web interface and make the following adjustments to the camera:
1. Loosen the locking screw.
2. Turn the lens holder to the desired position.
3. Turn the lens to ensure the (horizontal) lines on either side of the lens are aligned horizontally.
Note:
Ensure that the mark on the lens cover, between the horizontal lines, is facing up.
4. Once satisfied, gently tighten the locking screw to secure the camera’s position.
5. Open the
Focus Adjustment
page in the Web interface under
Setup > Basic Setup > Focus &
Zoom
, and follow the on-screen instructions. Use the image window to adjust the zoom and
focus. See the online help files for more information.
Note:
• Due to the dome’s refraction, the image may appear slightly out of focus once the dome has been placed.
To correct this go to the
Focus Adjustment
page in the Web interface under
Setup > Basic Setup >
Focus & Zoom
, and adjust the focus again.
Warning!
Adjusting the focus and zoom manually can damage the lens.
Locking screw
Lens holder
Lens
Horizontal line
Mark
