Axis AXIS 560, Быстрое руководство по установке

Страница: 7 / 11

Macintosh
There is no support for Apple TokenTalk in the AXIS 660.
Open the Chooser window by selecting Chooser in the Apple menu.
Follow these steps to choose a printer:
1. Click on the LaserWriter (or LaserWriter 8.0) Icon.
2. If your network has more than one zone, click the name of the
default zone.
3. Click the name of the printer you want. The default printer name
is shown as: AXIS<nnnnnn>_<port>, where <nnnnnn> is the last
six digits of the serial number, and <port> is LPT1, LPT2
* , or
COM1 * respectively.
*Not supported on the AXIS PrintPoint 1P 560/100 model.
4. For LaserWriter 8.0 printer driver only:
Click Setup..., and then Select Auto Setup. If the printer, just as
the print server, supports bi-directional printing the installation
will then be automatically performed. If not, you will be
prompted to select a PPD file matching your printer, then click
OK.
5. Click the close box. This completes the configuration.
Repeat this procedure for each Macintosh using the AXIS 560.
Windows
Supplied on the AXIS Utilities diskette, the AXIS Print Monitor
should be used for network printing within Windows 95 and
Windows NT environments. The AXIS Print Monitor supports
NetBIOS/NetBEUI as well as LPR printing.
The AXIS Print Utility for Windows is also supplied on the AXIS
Utilities disk and is the tool for network printing within Windows
for Workgroups and Windows 3.1 environments.
Follow the instructions on the AXIS Utilities diskette label to install
the appropriate printing tool for your environment.
Windows 95 and NT
Although the AXIS Print Monitor user dialog will vary slightly
between Windows 95 and Windows NT, the functionality of the
two variants is exactly the same.
Peer-to-Peer Printing:
The AXIS Print Monitor needs to be installed on each workstation
performing peer-to-peer printing. Follow the procedure below to
install Axis printer ports:
A Ap pp plle e
E EtherTalk
W Windows
560_qi.frm Page 6 Monday, May 25, 1998 10:04 PM