NetWare using NDPS (Controlled Access Printer)
1. Make sure that the HP Gateway is
not
configured to
automatically create a public access printer.
2. Connect the AXIS 560/660 to the NetWare network, if it is not
already connected.
3. Use the NetWare Administrator to create an NDPS printer as an
object in the directory.
As a directory object, access to the NDPS printer is controlled and it
is no longer available as a public access printer.
NetWare not using NDPS
Install your AXIS 560/660 with the AXIS NetPilot™ Installation
Wizard, supplied on the AXIS Utilities disk. Note that AXIS
NetPilot™ software requires a Windows platform that uses
NetWare or NetBIOS/NetBEUI.
1. Load the AXIS NetPilot™ software by following the instructions
on the label of the AXIS Utilities disk. After loading the software,
double click on the AXIS NetPilot™ icon.
2. The AXIS NetPilot™ will scan the network for Axis Network
Print Servers that have not been installed and your AXIS
560/660 will subsequently feature as a New Axis Unit. Select
your AXIS 560/660 from the Contents of ‘New Axis Units’ and
then click the Install icon. The Installation Wizard will then
guide you through the basic installation.
Should you require assistance with any of the operations click the
Help icon and follow the instructions provided in the Help window.
To set up print queues:
1. Select the Network Print Server to be set up by clicking its icon.
2. Choose Network from the Setup menu.
3. A new window will open that allows you to create print queues,
connect the AXIS 560/660 to print queues, and select either
Print Server mode or Remote Printer mode of operation for each
printer.
To set up the advanced operating parameters:
1. Select the Network Print Server to be set up by clicking its icon.
2. Choose Properties from the Setup menu.
3. A set of Property Pages are opened which allow you to set up the
way in which Print Server mode and Remote Printer mode
operate. You can also enable the frame types to be used.
The setup is now completed and you can close the AXIS NetPilot™.
Open a Windows application, e.g. Microsoft Word and then select
Print... to ensure that your printer appears as the default printer.
Make a test printout to verify that the AXIS 560/660 is functioning
correctly.
560_qi.frm Page 4 Monday, May 25, 1998 10:04 PM
Содержание AXIS 560
Страница 1: ...BACK TO AXIS ONLINE ...
