Page 6
AXIS 207/207W/207MW Installation Guide
Connection diagram
LED indicators
LED
Color
Indication
Wireless
Unlit
Wired mode.
Green
Steady for connection to a wireless network. Flashes for network activity.
Red
Steady for no wireless network connection. Flashes when scanning for wireless
networks.
Network
Green
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber
Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit
No wired network connection, or AXIS 207MW/AXIS 207W in wireless mode.
Status
Green
Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to
Setup > System
Options > LED settings.
See the online help files for more information.
Amber
Steady during startup, during reset to factory default or when restoring settings.
Red
Slow flash for failed upgrade.
Power
Green
Normal operation.
Amber
Flashes green/amber during firmware upgrade.
o
o
o
o
o o
Camera
3.3V
Power - see table above.
e.g. pushbutton
Device
4
o
3
o
Linear
Power
Supply
o
1
o
o
Relay
GND
+
2
Fuse
IMPORTANT!
This diagram applies to the AXIS
207W and AXIS 207MW. The AXIS
207 has a different pinout and
power - see the table above.
2
1
Fuse:
AXIS 207: 500mA
AXIS 207W/MW: 1A
