Axis AX-TV, Руководство пользователя

Страница: 6 / 12

User manual - 4
Network settings
You need to configure the network parameters to connect to the cameras. Choose the connection you
prefer, Ethernet or WIFI, and make sure that the corresponding checkbox is selected or the
communications will not be active.

WIFI configuration
Menu >> Settings >> Network settings >> WIFI settings
Select the WIFI network and enter the corresponding password. When the connection it is
correct you will see a
connected label
under the selected name’s network.

Ethernet configuration
Menu >> Settings >> Network settings >> Ethernet settings
Connect the local network cable. The DHCP protocol configures automatically the network
parameters. If you want to edit the network parameters select the
Ethernet settings option.
C
amera’s connection
Menu >> Settings >> Axis cameras configuration >> Axis cameras
In this screen you have to introduce the IP/URL cameras address you want to watch.
The unit has a sample configuration that you can change, select the Delete All button and press it, this
option delete the entire sample IP/URL to start from an empty configuration with the default values.
The default values includes the master credentials, all the cameras uses the user and password
defined as master credentials, if a camera has a different password or user, you have to uncheck this
option and enter the necessary data.
One of the default values is the connection port, by default is 80 changed it only if necessary.
The camera’s appearance is adjusted automatically, the default value is fixed in auto section but you
can assign to the camera a defined appearance, 16:9 or 4:3.
You can change the camera’s name in the
Name section; it can appear overlaid on the video by
selecting the Show Name option.
Press the [Exit ] button and wait until the connection to the cameras is checked, if an error occurs
check the cameras configuration.