Axis AX-M40 Скачать руководство пользователя

Страница: 9 / 10

The meat and food chopper attachment should be operated in second or

third speed. If material in the cylinder stalls the mixer, stop the mixer at

once. DO NOT attempt to restart the mixer in a lower speed - remove the

adjusting ring, knife, plate, and worm and clear the obstruction.

MAINTENANCE

NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY

AFTER UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL

POWER AND GROUNDING.

CLEANING

• Never use a metal or stiff brush to clean the mixer. Never

clean the mixer with a water hose or any fluid pressure.

• The mixer should be thoroughly cleaned daily.

• Bowls and agitators should be removed from the mixer and cleaned in

a link.

• The DRIP RING or

SAFETY GUARD

should be inspected

periodically for moisture or lubricant dripping. Remove the cup and

wipe it with a soft cloth. A large flat blade screwdriver may be used to

remove the drip cup after remove the screw.

LUBRICATION

• The transmission case is filled special grease that will last for several

years. When grease is needed for replacement, it should be ordered

from our authorized service representative.

• Planetary gears are already filled with enough lubricating grease. No

more grease is to be filled.

MIXING HEAVY DOUGH

Содержание AX-M40











Результаты поиска

Содержание AX-M40

Отзывы:

Похожие инструкции для AX-M40

Бренды по названию

Популярные бренды

Axis AX-M40, Установка, эксплуатация и уход

Результаты поиска

Содержание AX-M40

Отзывы:

Похожие инструкции для AX-M40

Бренды по названию

Популярные бренды