Management and Configuration
80
AXIS 5400+ / AXIS 5600+ User’s Manual
Admin
When in Admin mode, you have access to all the print server's parameters
and you can change them to your liking. This mode is intended for
network administrators and can be password protected to prevent
unauthorized changing of the print server parameters.
Note:
Accessing the Web
Pages
Follow the steps below to access the internal Web pages of the Axis
Network Print Server:
1. Enter the print server’s IP address (or host name) in the
Location/Address
field of your Web browser. Press
Enter
2. The
Printer Overview
page will appear. Click Admin to access the
Administration Web pages.
3. If you have changed the User/Password combination, you will be prompted
for them. Click
OK
.
Note:
To protect the Admin pages from unauthorized use, it is highly recommended that you change
the default password.
This is done from the
Admin | General Settings | General
tab. Enter the password in the Root
Password field.
You can address the print server’s Web interface via
https://
To do this you must enable the
SSL/TLS protocols in the Web interface:
Admin | Network Settings | Detailed View | TCP/IP
Network
and set the
HTTPS Enabled
parameter to
Yes
(you must have a valid certificate
loaded). If you do not have a valid certificate loaded, select
Admin | Security Settings |
HTTPS
and click
Create.
