Axis 215 PTZ, Руководство по установке, Страница: 7 / 87

AXIS 215 PTZ Installation Guide Page 7
ENGLISH ENGLISH
Drop ceiling mounting
1. If possible, remove the ceiling tile in which the drop ceiling mount is to be fitted.
2. Use the supplied template to mark the position for the hole in the ceiling tile. Remove the
protective paper, fix to ceiling tile and cut around the template.
Note:
The combined weight of the camera, ceiling mount and cover is 1.26 kg (2.78 lb).
Check that the ceiling material is strong enough to support this weight. The
thickness of the ceiling should be 20-60mm (0.79”-2.36”).
3. Tilt and insert the outer ceiling bracket through the hole, and then pull it into place. The
bracket should be positioned so that the 3 vertical tabs point downwards in the hole.
4. Pull all of the required cables
(network, power, etc) down through
the hole, ready for connection.
5. Align the camera’s screw holes with
the holes in the inner ceiling
bracket, and using the 4 supplied
M4x10 screws, mount the camera
on the inner ceiling bracket, as
illustrated here.
Ceiling tile
Outer ceiling bracket
Hole diameter 168-175mm
(6.6-6.9”)
inner ceiling bracket
tabs
tabs