AXIS P32 Dome Camera Series
Specifications
Status LED
Indication
Unlit
Connection and normal operation.
Green
Shows steady green for 10 seconds for normal operation after startup completed.
Flashes green during wireless network pairing.
Steady green for normal operation.
Flashes before startup if the temperature is below -20 °C and heating is required. The product
starts when it reaches operating temperature.
Amber
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Steady during startup. Flashes when restoring settings.
Amber/Red
Flashes amber/red if network connection is unavailable or lost.
Red
Firmware upgrade failure.
Network LED
Indication
Green
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to a 1 Gbit/s network. Flashes for network activity.
Amber
Steady for connection to a 10 Mbit/s network. Flashes for network activity.
Steady for connection to a 10/100 Mbit/s network. Flashes for network activity.
Unlit
No network connection.
Power LED
Indication
Green
Normal operation.
Amber
Flashes green/amber during firmware upgrade.
Microphone power LED
Indication
Unlit
Phantom power off.
Blue
Phantom power on.
Steady when the phantom power is on and the microphone is connected.
Flashes when the phantom power is on and the microphone is disconnected.
Wireless LED
Indication
Unlit
Wired mode.
Green
Steady for connection to a wireless network. Flashes for network activity.
Red
Steady for no wireless network connection. Flashes while scanning for wireless networks.
Amber
Steady or flashing during wireless network pairing.
Note
• The tally LED (indication LED) only indicates network transmission. If video or audio is only transmitted through HDMI
or SDI the tally LED will be unlit.
56