2
2
182 mm
53 mm
3
Tap
1
2
3
4
Bend these
claws, if necessary
1
release screw
and bracket
10
7
1
2
3
4
4
5
8
Lock Washer
Plain Washer
Hex
53mm
182mm
3
2
182mm
53mm
1
1
2
4
1. UNIT
2. RELEASE CASE
3. DASH BOARD
4. HEX NUT
5. LOCK WASHER
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X 15 HEX BOLT
Dashboard
Bend these
claws, if necessary
INSTALLATION
PRECAUTIONS
• Carefully choose the mounting location so normal driving is not hindered.
• Avoid installing the unit where it would be subject to high temperatures (direct sunlight or hot air
from the heater) or where it would be subject to dust, dirt or excessive vibration.
• Only use the supplied mounting hardware for a safe and secure installation.
• Be sure to remove the front panel before installing the unit.
NOTE: Angle for car radio installation must not exceed 30˚ otherwise the front panel may not open.
* Use only the supplied fixing screws. Use of screws any longer than those supplied may result in
damage to internal components.
MOUNTING EXAMPLE Installation in the dashboard
TO SUPPORT THE UNIT