AXIOMTEK UST100-504-FL Series, Руководство пользователя

Страница: 15 / 64

UST100-504-FL Series u
ser’s Manual
Hardware Installation
7
SECTION 2
HARDWARE INSTALLATION
The UST100-504-FL is convenient for various hardware configurations, such as CPU, DRAM,
HDD (Hard Disk Drive), SSD (Solid State Drive), and PCI Express Mini Card modules. Section
2 contains guidelines for hardware installation.
2.1 Installing SO-DIMM
Step 1 Turn off the system and unplug the power cord.
Step 2 Remove the screws on both sides of the system.
Step 3 Pull the main system away from its bottom cover, flip the system over
180 degrees and put it upside down. (To avoid pulling the SATA cable
while extracting the system, be sure to first remove the cable attached
to the bottom cover.)
Step 4 Locate the SO-DIMM socket on the motherboard.
Step 5 Use the thermal pad available from the accessory bag and attach it to
the position of the slot.
Step 6 Insert the memory
module’s gold finger into the socket and press the
module down until it is fully seated. The socket latches will clip onto
the edges of the memory module to lock it in place.
【
Note
】
: If no more SO-DIMM replacement is required, it is recommended to
secure the module in place with hot melt adhesive.