AXIOMTEK SHB150R Series, Руководство пользователя

Страница: 16 / 88

SHB150R LGA1151 Full-size CPU Card
10 Board and Pin Assignments
2.4.1 Temperature Sensor Connector (CN1) (Optional)
This is a 2-pin connector for temperature sensor (NTC thermistor) interface. The
thermistor value should be 10K and its B value is 3435K.
2.4.2 Ethernet Ports (CN5)
The board has two RJ-45 connectors: LAN1 (i219LM) and LAN2 (i211AT). Ethernet
connection can be established by plugging one end of the Ethernet cable into this RJ-45
connector and the other end (phone jack) to a 1000/100/10 Base-T hub.
LAN1 LAN2
Pin Signal
1 Sensor Input
2 GND
Pin
1000
Base-T 100/10
Base-T
Description
L1 BI_DA+ TX+ Bidirectional or Transmit Data+
L2 BI_DA- TX- Bidirectional or Transmit Data-
L3 BI_DB+ RX+ Bidirectional or Receive Data+
L4 BI_DC+ N.C. Bidirectional or Not Connected
L5 BI_DC- N.C. Bidirectional or Not Connected
L6 BI_DB- RX- Bidirectional or Receive Data-
L7 BI_DD+ N.C. Bidirectional or Not Connected
L8 BI_DD- N.C. Bidirectional or Not Connected
A
Speed LED
1000: Orange
100/10: OFF/Green
B
Active Link LED (Yellow)
Off: No link
Blinking: Data activity detected