AXIOMTEK SHB150R Series, Руководство пользователя

Страница: 13 / 88

SHB150R LGA1151 Full-size CPU Card
Board and Pin Assignments 7
2.3 Jumper Settings
A jumper is a small component consisting of a jumper clip and jumper pins. Install a jumper clip
on two jumper pins to close a jumper. Remove the jumper clip from two jumper pins to open a
jumper. The following illustration shows how to set up a jumper.
Before applying power to the SHB150R series, please make sure all of the jumpers are in
factory default position. Below you can find a summary table and onboard default settings.
Note
Turn off power before changing any default jumper settings.
Jumper Description Setting
JP3
Auto Power On
Default: Enable
1-2 Close
JP2
Restore BIOS Optimal Defaults
Default: Normal Operation
1-2 Close