SBC82810 Pentium
®
M All-in-One Half-Size Board User’s Manual
Award BIOS Utility
51
z
Video Off Method
Determines the manner in which the monitor is blanked.
V/H
SYNC+Blank
Turns OFF vertical and horizontal
synchronization ports and writes blanks to the
video buffer
DPMS
Select this option if your monitor supports the
Display Power Management Signaling (DPMS)
standard of the Video Electronics Standards
Association (VESA). Use the software supplied
for your video subsystem to select video power
management values.
Blank Screen
System only writes blanks to the video buffer.
z
Video Off After
As the system moves from lesser to greater power-saving modes,
select the mode in which you want the monitor to blank off. The
default value is
“
Standby
”
.
NA
System BIOS will never turn off the screen
Suspend
Screen off when system is in SUSPEND mode
Standby
Screen off when system is in STANDBY mode
Doze
Screen off when system is in DOZE mode
NOTE:
Green monitors detect the V/H SYNC signals to turn off
its electron gun
z
Modem Use IRQ
3, 4, 5, 7,
9, 10, 11,
NA
For external modem, 3 or 4 will be used for card
type modem. It is up to card definition. Default is
3.
z
Doze Mode
After the selected period of system inactivity (1 minute to 1 hour),
the CPU clock runs at slower speed while all other devices still
operate at full speed. The default value is
“
Disabled
”
.
Disabled
System will never enter doze mode
1/2/4/6/8/10/20/30/
40 Min/1 Hr
Defines the continuous idle time before
the system entering DOZE mode.
