AXIOMTEK OPS500-501 Series, Руководство пользователя

Страница: 33 / 54

OPS500-501
User’s Manual
Connectors
27
3.1.13 RJ45 (I219LM) (LAN1)
The RJ-45 connector LAN1 is for Ethernet. To connect the board to 100-Base-T or 1000-
Base-T hub, just plug one end of the cable into LAN1
and connect the other end (phone jack)
to a 100-Base-T hub or 1000-Base-T hub.
Pin Signal
1 2 3 4 5 6 7 8
A B
1 Tx+ (Data transmission positive)
2 Tx- (Data transmission negative)
3 Rx+(Data reception positive)
4 RJ-1(For 1000 base T-Only)
5 RJ-1(For 1000 base T-Only)
6 Rx- (Data reception negative)
7 RJ-1(For 1000 base T-Only)
8 RJ-1(For 1000 base T-Only)
A Active LED
B Speed LED
3.1.14 DC Power Jack (PWR1)
PWR1 is a ø 2.5mm DC Power Jack. Loose connection may cause system instability and
make sure all components/devices are been installed properly before connecting.
Pin Signal
1 +12V or +19V
2 GND