AXIOMTEK NA590 Series, Руководство пользователя, Страница: 19 / 78

NA590 Series User
’s Manual
Hardware and Installation 13
2.3.1 CMOS Clear Jumper (JP3)
Use this jumper to erase and restore CMOS memory and BIOS setting. Put jumper clip to
pin 2-3 for a few seconds then move it back to pin 1-2. By doing this procedure CMOS
data resets to its safe default settings.
Description Function Jumper Setting
COMS Clear
Normal (Default)
JP3
Clear CMOS
JP3
2.3.2 LAN Bypass Control Selection Jumper (JP6, JP7, JP8)
Description Function Jumper Setting
LAN Bypass Trigger
when Power On
Mother board/SEGN1 ~2
Bypass as same as Power Off status
JP6
JP7
JP8
Mother board/SEGN1 ~2
Bypass Disable(Default)
JP6
JP7
JP8
Mother board/SEGN1 ~2
Bypass Enable
JP6
JP7
JP8
Note: When the system is turned on, you can select LAN bypass function by Jumper and
Bios when power on state, when enter the OS, you can select LAN bypass function at
power on/ off state by software.