AXIOMTEK NA342, Руководство пользователя

Страница: 45 / 52

NA342 Series Network Appliance U
ser’s Manual
LAN Bypass Configuration 39
Power OFF Bypass Control Register (0x8E1)
7
6 5 4 3 2
1 0
X X X X X X X SEGF1
-- -- -- -- -- -- -- W
Default value: 00000000
Bit 1~7 Not used.
Bit 0 SEGF1
Use the corresponding bit to configure each segment. Setting the bit to 1 enables
LAN bypass on the segment when power off. Clearing the bit to 0 disables LAN
bypass on the segment when power off.
NOTE: NA342 series support SEGN1 for Lan 3 Lan4 only.
Data read back from this register is not defined and therefore must be ignored. Reading from
this register makes no effect on LAN bypass function. When system is turned off, last data
written onto this register will be kept. If you want to make any change, turn on the system and
make sure to reconfigure the register.