NA-806B / C Hardware Installation Guide
Award BIOS Utility
22
NOTE: To disable security, select PASSWORD SETTING at
Main Menu and then you will be asked to enter
password. Do not type anything, just press <Enter>
and it will disable security. Once the security is
disabled, the system will boot and you can enter Setup
freely.
MPS Version Control For OS
This item allows you to select the version of MPS table for NT 4.0.
The choice: 1.1, 1.4
OS Select for DRAM > 64MB
This segment is specifically created for OS/2 when DRAM is
larger than 64MB. If your operating system is OS/2 and DRAM
used is larger the 64MB, you have to select “OS 2”, otherwise
(under non-OS2), default is NON-OS2.
The default value is
“Non-OS2”
.
Agent Connect via
This item is just highlight the routing between console port with
PC client.
The default value should be Null.
Agent Waiting Time
This item is just highlight the polling timer. If the console port
doesn’t receive the inquiry from PC client in the time frame. It will
be cut out the monitoring path for BIOS booting from console. The
default value should be 1 minutes.
The choice: 1, 2, 4 and 8
System
The system will not boot and access to Setup
will be denied if the incorrect password is
entered at the prompt.
Setup
The system will boot, but access to Setup will
be denied if the correct password is not
entered at the prompt.