NA-806D Hardware Installation Guide
Award BIOS Utility
21
Virus Warning
This item protects the boot sector and partition table of your hard
disk against accidental modifications. If an attempt is made, the
BIOS will halt the system and display a warning message. If this
occurs, you can either allow the operation to continue or run an
anti-virus program to locate and remove the problem.
NOTE:
Many disk diagnostic programs, which attempt to
access the boot sector table, can cause the virus
warning. If you will run such a program, disable the
Virus Warning feature.
Quick Power On Self Test
This option speeds up Power On Self Test (POST) after you turn
on the system power. If set as Enabled, BIOS will shorten or skip
some check items during POST. The default setting is
“Enabled”
.
Enabled Enable
Quick
POST
Disabled Normal
POST
First/Second/Third Boot Device
These items allow the selection of the 1
st
, 2
nd
, and 3
rd
devices that
the system will search for during its boot-up sequence. The wide
range of selection includes Floppy
,
LS120, ZIP100, HDD0~3,
SCSI, and CDROM.
Boot Other Device
This item allows the user to enable/disable the boot device not
listed on the First/Second/Third boot devices option above. The
default setting is
“Enabled“
.
Boot Up NumLock Status
This option enables and disables the numblock function of the
keypad. The default value is
“On”
.
On
Keypad functions confine with numbers
Off
Keypad functions convert to special functions (i.e.,
left/right arrow keys)
Security Option
This item allows you to limit access to the system and Setup, or
just to Setup. The default value is
“Setup”
.