AXIOMTEK MIRU130 страница 47 Скачать руководство пользователя | Manualshive

Страница: 47 / 73

background image

Machine Vision MIRU130 Board

AMI BIOS Setup Utility

41

Chapter 6

AMI BIOS Setup Utility

The AMI UEFI BIOS provides users with a built-in setup program to modify basic system
configuration. All configured parameters are stored in a flash chip to save the setup information
whenever the power is turned off. This chapter provides users with detailed description about
how to set up basic system configuration through the AMI BIOS setup utility.

6.1

Starting

To enter the setup screens, follow the steps below:

1.

Turn on the computer and press the <Del> key immediately.

2.

After you press the <Del> key, the main BIOS setup menu displays. You can access the
other setup screens from the main BIOS setup menu, such as the Advanced and Chipset
menus.

Note

If your computer cannot boot after making and saving system changes with BIOS
setup, you can restore BIOS optimal defaults by setting SW1-2 (see section 2.4.1).

It is strongly recommended that you should avoid changing the chipset

’s defaults. Both AMI

and your system manufacturer have carefully set up these defaults that provide the best
performance and reliability.

6.2

Navigation Keys

The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS
setup utility hot keys can be used at any time during the setup navigation process. These keys
include <F1>, <F2>, <Enter>, <ESC>, <Arrow> keys, and so on.

Note

Some of the navigation keys differ from one screen to another.

«
...
45
46
47
48
49
...
»

Содержание MIRU130










































































Отзывы:

Нет отзывов

Похожие инструкции для MIRU130

Бренд: AKM Страницы: 34

Бренд: DIEBOLD NIXDORF Страницы: 96

Бренд: Advantech Страницы: 118

Spacewalker AK32

Бренд: Shuttle Страницы: 89

Бренд: EVGA Страницы: 80

Бренд: Texas Instruments Страницы: 24

Бренд: DFI Страницы: 60

Бренд: ON Semiconductor Страницы: 8

KXTJ3-1057-EVK-001

Бренд: Rohm Страницы: 3

Бренд: Texas Instruments Страницы: 20

Бренд: IDT Страницы: 18

Бренд: Avalue Technology Страницы: 71

Бренд: MSI Страницы: 87

Бренд: Pericom Страницы: 8

Бренд: Texas Instruments Страницы: 21

IMX233-OLX-NANO

Бренд: OLIMEX Страницы: 36

Бренд: Aaeon Страницы: 90

Бренд: J&W Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды