AXIOMTEK MANO523 Series, Руководство пользователя

Страница: 14 / 87

MANO523 Mini ITX Motherboard
8 Board and Pin Assignments
Note
To identify the first pin of a header or jumper, please refer to the following
information:

Usually, there is a thick line or a triangle near the header or jumper pin 1.
2.3 Jumper and Switch Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Before applying power to MANO523 Series, please make sure all of the jumper and switch are
in factory default position. Below you can find a summary table of jumper, switch and onboard
default settings.
Note
Once the default jumper and switch settings need to be changed, please do it
under power-off condition.