AXIOMTEK MANO315 Series, Руководство пользователя

Страница: 13 / 56

MANO315 Mini ITX Motherboard
Board and Pin Assignments 7
2.3 Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Before applying power to MANO315 Series, please make sure all of the jumpers are in factory
default position. Below you can find a summary table of all jumpers and onboard default
settings.
Note
Once the default jumper setting needs to be changed, please do it under power-off
condition.
Jumper Description Setting
JP1
Clear CMOS
Default: Normal
1-2 Close
JP2
AT/ATX Power Mode Select
Default: ATX Mode
1-2 Close
JP9
COM3/COM4 Data/Power Select
Default: RS-232 Data
COM3 Pin 9: RI# 3-5 Close
COM4 Pin 9: RI# 4-6 Close