AXIOMTEK MANO310 Series, Руководство пользователя

Страница: 15 / 65

MANO310 Mini ITX Motherboard
Board and Pin Assignments 9
2.3 Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Before applying power to MANO310 Series, please make sure all of the jumpers are in factory
default position. Below you can find a summary table of all jumpers and onboard default
settings.
Note
Once the default jumper setting needs to be changed, please do it under power-off
condition.
Jumper Description Setting
JP1
Clear CMOS
Default: Normal
1-2 Close
JP2
AT/ATX Power Mode Select
Default: ATX Mode
1-2 Close
JP3
COM1 RS-232/422/485 Mode Select
Default: RS-232
1-2 Close
JP4 3-5, 4-6 Close
JP5 3-5, 4-6 Close
JP6
COM2 RS-232/422/485 Mode Select
Default: RS-232
1-2 Close
JP7 3-5, 4-6 Close
JP8 3-5, 4-6 Close
JP9
COM3 Data/Power Select
Default: RS-232 Data
COM3 Pin 1: DCD# 3-5 Close
COM3 Pin 8: RI# 4-6 Close
JP10
LVDS Backlight PWM/CCFL Select
Default: PWM
1-2 Close
JP11
LVDS VDD Select
Default: +3.3V
1-2 Close