AXIOMTEK GOT3156T-832, Руководство пользователя

Страница: 18 / 48

GOT3156T-832
User’s Manual
12 Hardware and Installation
Back
2.3.3 Auto Power On (JP4)
If JP4 is enabled for power input, the system will be automatically power on
without pressing soft power button. If JP4 is disabled for power input, it is
necessary to manually press soft power button to power on the system.
2.3.4 Restore BIOS Optimal Defaults (JP6)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing
this procedure can restore BIOS optimal defaults.
2.4 COM port Connector
The pin assignment of RS-232/RS-422/RS-485 is listed on the following table. If
you need COM1 port to support RS-422 or RS-485 mode, please refer to Jumper
Settings
Function Setting
Enable auto power on 1-2 close
Disable auto power on (Default) 2-3 close
Function Setting
Normal operation (Default) 1-2 close
Restore BIOS optimal defaults 2-3 close
Pin RS-232 RS-422 RS-485
1 DCD
TX- Data-
2 RXD
TX+ Data+
3 TXD RX+ No use
4 DTR
RX- No use
5 GND
GND GND
6 DSR No use No use
7 RTS
No use No use
8 CTS
No use No use
9 RI No use No use