manualshive.com logo in svg

AXIOMTEK GOT-2770S, Руководство пользователя

Поделиться
Скачать
AXIOMTEK GOT-2770S Скачать руководство пользователя страница 28

GOT-2770S User’s Manual

 

 

2.4 CE Requirements 

EU directives that apply to the GOT-2770S Series: 

 

EMC Directive (89/336/EEC, 92/31/EEC, 93/68/EEC) 

electromagnetic emissions and immunity 

 

Machinery Directive (89/392/EEC, 91/368/EEC, 93/44/EEC, 

93/ 68/EEC) machine safety 

 

GOT-2770S products will be CE-marked to indicate 

compliance with the EMC Directive.   

 

The GOT-2770S Series has been designed to operate satisfactorily in 

electromagnetic noise (immunity) and without emitting high levels of 

electrical noise into the environment (emission). The units are 

designed to meet European Community standards when installed per 

the wiring instructions in this manual. 

 

Compatibility  

Standards

 

The GOT-2770S has been designed to meet 
electromagnetic compatibility for industrial 
environments. 

• CISPR (EN 55011) Group 1, Class A Radiated 
Emissions levels 

• EN50081-2 Generic emission standard, 
industrial environment (Also US FCC Class A) 

• EN50082-2 Generic immunity standard, 
industrial environment 

 

Installation Instructions

 

20 

Содержание GOT-2770S





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды