AXIOMTEK eBOX630-100-FL Series, Руководство пользователя

Страница: 47 / 88

eBOX630-100-FL Series U
ser’s Manual
Jumper Setting & Connector 37
3.2.1 Audio Output Selection Jumper (JP1)
JP1 is to select line out or speaker out as source of audio output
on audio connector CN2. W hen speaker out is used, it delivers
1W /channel continuous at 8 Ohm loads.
3.2.2 Auto Power On (JP11)
If JP11 is enabled for power input, the system will be automatically
power on without pressing soft power button. If JP11 is disabled for
power input, it is necessary to manually press soft power button to
power on the system.
Note: This function is similar to the feature of power on after power
failure, which is controlled by hardware circuitry instead of
BIOS.
Function Setting
Line out (Default) 1-3, 2-4 close
Speaker out 3-5, 4-6 close
Function Setting
Disable auto power on
(Default)
1-2 close
Enable auto power on 1-2 open