AXIOMTEK eBOX630-100-FL Series, Руководство пользователя

Страница: 3 / 88

iii
Safety Precautions
Before getting started, please read the following important safety
precautions.
1. User should not modify any unmentioned jumper setting without
Axiomtek FAE
’s instruction. Any modification without instruction
might cause system to become damage
2. The eBOX620-110-FL does not come equipped with an operating
system. An operating system must be loaded first before
installing any software into the computer.
3. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist strap
and place all electronic components in any static-shielded
devices. Most electronic components are sensitive to static
electrical charge.
4. Disconnect the power cord from the eBOX620-110-FL before
making any installation. Be sure both the system and the external
devices are turned OFF. Sudden surge of power could ruin
sensitive components. Make sure the eBOX620-110-FL is
properly grounded.
5. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
6. Turn OFF the system power before cleaning. Clean the system
using a cloth only. Do not spray any liquid cleaner directly onto
the screen.
7. Do not leave this equipment in an uncontrolled environment
where the storage temperature is below -20
℃
or above 80
℃
. It
may damage the equipment.
8.
Do not open the system’s back cover. If opening the cover for
maintenance is a must, only a trained technician is allowed to do
so. Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
 Before handling a board or integrated circuit, touch an
unpainted portion of the system unit chassis for a few
seconds. This will help to discharge any static electricity on
your body.
 When handling boards/components, wear a wrist-grounding
strap which available from most electronic component stores.