AXIOMTEK DSA-132 Series, Руководство пользователя, Страница: 39 / 60

DSA-132 User
’
s Manual
PHOENIX-AWARD BIOS Setup Utility
31
 IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you
set a PIO mode (0-4) for each of the four IDE devices that
the onboard IDE interface supports. Modes 0 to 4 provide
successively increased performance. In Auto mode, the
system automatically determines the best mode for each
device.
 IDE Primary/Secondary Master/Slave UDMA
Select the mode of operation for the IDE drive. Ultra DMA-
33/66/100/133 implementation is possible only if your IDE
hard drive supports it and the operating environment
includes a DMA driver. If your hard drive and system
software both support Ultra DMA-33/66/100/133, select Auto
to enable UDMA mode by BIOS.
 SATA Mode
There are these options for you to set up SATA mode: IDE
or RAID.
 SATA PORT Speed Settings
Use this item to select SATA I or SATA II device support
forcedly.
Press <Esc> to return to the Integrated Peripherals page.