AXIOMTEK DSA-132 Series, Руководство пользователя, Страница: 28 / 60

DSA-132 User’s Manual
PHOENIX-AWARD BIOS Setup Utility
20
 IDE Channel 0/1/2/3 Master/Slave
These items identify the types of each IDE channel installed in the
computer. There are 45 predefined types (Type 1 to Type 45) and
2 user’s definable types (Type User) for Enhanced IDE BIOS.
Press <PgUp>/<+> or <PgDn>/<
−
> to select a numbered hard
disk type, or directly type the number and press <Enter>. Please
be noted your drive’s specifications must match the drive table.
The hard disk will not work properly if you enter improper
information. If your hard disk drive type does not match or is not
listed, you can use Type User to manually define your own drive
type.
If selecting Type User, you will be asked to enter related
information in the following items. Directly key in the information
and press <Enter>. This information should be provided in the
documentation from your hard disk vendor or the system
manufacturer.
If the HDD interface controller supports ESDI, select “Type 1”.
If the HDD interface controller supports SCSI, select “None”.
If the HDD interface controller supports CD-ROM, select “None”.
CYLS.
number of cylinders
LANDZONE
landing zone
HEADS number of heads SECTORS number of sectors
PRECOMP write precom MODE HDD access mode
If there is no hard disk drive installed, select NONE and press
<Enter>.
 Halt On
This item determines whether the system will halt or not, if an error
is detected while powering up.
No errors
The system booting will halt on any errors detected.
(default)
All errors
Whenever BIOS detects a non-fatal error, the
system will stop and you will be prompted.
All, But
Keyboard The system booting will not stop for a keyboard
error; it will stop for other errors.
All, But
Diskette
The system booting will not stop for a disk error; it
will stop for other errors.
All, But
Disk/Key
The system booting will not stop for a keyboard or
disk error; it will stop for other errors.