2 9418D860000E
©
Copyright 2011 Axiomtek Co., Ltd.
Version A1 November 2011
Printed in Taiwan
Bottom Side
Connectors
Switch Setting
SW1
Connector
Description
SDIMM1
DDR3 SO-DIMM
Connector
SDIMM2
DDR3 SO-DIMM
Connector
SS3 COM
Express
TM
Connector
SS4 COM
Express
TM
Connector
Description
Setting
Disable auto power on
(Default)
OFF position
Enable auto power on
ON position
SS3
SS4
9418D860000E 3
©
Copyright 2011 Axiomtek Co., Ltd.
Version A1 November 2011
Printed in Taiwan
Installing Heatspreader
1. There is a protective plastic covering on the thermal pads. This must be
removed before the heatspreader can be mounted.
2. Each heatspreader is designed for a specific CEM module. The thermal
pads on the heatspreader are designed to make contact with the
necessary components on the CEM module. When mounting the
heatspreader you must make sure that the thermal pads on the
heatspreader make complete contact (no space between thermal pad
and component) with the corresponding components on the CEM
module. This is especially critical for CEM modules that have higher
CPU speeds (for example 1.0GHz or more) to ensure that the
heatspreader acts as a proper thermal interface for cooling solutions.
3. This CPU module has five assembly holes for installing heat spreader
plate. Use the five screws (M2.5x15L) to secure the heat spreader plate
to the CEM860. Be careful not to over-tighten the screws.
4. If you need additional information for thermal solution, please refer to
below image to design your system’s cooling.
