4 9418D860000E
©
Copyright 2011 Axiomtek Co., Ltd.
Version A1 November 2011
Printed in Taiwan
Quick Start
The basic procedures required to power on CEM860:
(1). Require DC +12V power at minimum 4.5A. Make sure the power is
OFF before connecting the CEM860.
(2). Check to ensure the onboard switch SW1 is set to default (OFF
position).
(3). Firmly install DDR3 memory module(s) into connector(s) SDIMM1(and
SDIMM2) until fully seated.
(4). Attach heatspreader to the CEM860, refer to section Installing
Heatspreader.
(5). Install the CEM860 onto COM Express
TM
baseboard, for example,
CEB94006 baseboard.
(6). Properly install all necessary peripheral devices such as hard disk,
monitor, keyboard and etc. to the baseboard.
(7). Firmly attach power supply to the baseboard’s power connector.
(8). Turn on the system power.
CEM860 Quick Installation Guide
9418D860000E 1
©
Copyright 2011 Axiomtek Co., Ltd.
Version A1 November 2011
Printed in Taiwan
Checklist
9
CEM860 Board x1
9
Product Information CD x1
9
Quick Installation Guide x1
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Please refer to the product information CD for the complete user’s
manual, drivers and utilities. User’s manual and related documents are
in Acrobat PDF format.
Board Layout
Top Side
C
EM8
60 2
nd
Gener
ati
on
Intel
®
Core
TM
Proc
essor
CO
M Express
TM
Type 6
Basic Modu
le
