AXIOMTEK CAPA13S Series, Руководство пользователя

Страница: 19 / 69

CAPA13S Capa Board
Board and Pin Assignments 13
2.5.1 Front Panel Connector (CN2)
This is a 2x6-pin header (pitch=2.0mm) for front panel interface.
2 4 6 8 10 12
1 3 5 7 9 11
Internal Buzzer
Pin 1(-) and 2(+) connect the internal buzzer cable.
Power Status (PS-ON)
Pin 4 and pin 3 are PS-ON signal which are connected to know the power status of this
board.
Power LED
Pin 6 connects anode (+) of LED and pin 5 connects cathode (-) of LED. The power LED
lights up when the system is powered on.
Power On/Off Button
Pin 8 and 7 connect the power button on front panel to CPU board, which allows users to
turn on or off power.
System Reset Switch
Pin 10 and 9 connect the case-mounted reset switch that reboots your computer without
turning off the power switch. It is a better way to reboot your system for a longer life of
system power supply.
HDD Activity LED
This connection is linked to hard drive activity LED on the control panel. LED flashes
when HDD is being accessed. Pin 12 and 11 connect the hard disk drive to the front
panel HDD LED, pin 11 is assigned as cathode(-) and pin 12 is assigned as anode(+).
2.5.2 USB 2.0 Wafer Connector (CN5)
This is a 2x5-pin (pitch=2mm) wafer connector, which is compliant with Hirose
DF11-XDP-2DSA, for installing versatile USB 2.0 compliant interface peripherals.
Pin Signal Pin Signal
1 BUZZER- 2
3 GND 4 PWR_PSON
5 PWRLED- 6
7 PWRSW- 8 PWRSW+
9 HW RST- 10 HW RST+
11 HDDLED- 12
Pin Signal Pin Signal
1
USB VCC
(+5V_SBY)
2
USB VCC
(+5V_SBY)
3 USB_1_DM0 4 USB_1_DM1
5 USB_1_DP0 6 USB_1_DP1
7 GND 8 GND
9 GND 10 GND